But... Sir...
This is a single seater... 0_0
Anyway, I did find this in the meanwhile:
Engine Fire
If an engine fire is detected in either engine, the engine fire right or left T-Handle will illuminate. In case of such a fire, follow these steps:
1. Reduce power to affected engine and monitor if the fire light goes out. If the fire persists…
2. Set the throttle of the affected engine to OFF.
3. Pull the fire T-Handle of the affected engine.
4. Press the fire discharge agent switch left or right.
5. If both presses of the discharge agent switch fail to put out the fire, land as soon as possible.