Spriteworks from Vosur (Mark 2)

[Vosur Aekira]

Got through with this project, might make more starship designs about the size of the previous-set though.

[Vosur Aekira]

Still trying to remain productive with ideas.


A set of elemental-based Psionic Swords for Alessia.


Multi-elemental Mana Swords


And a Plasma-Hybrid Whipsword for a friend of mine outside of the forums.

[Vosur Aekira]

Been a little while, mostly busy with stuff from work, so I haven't had much sit-down-and-relax time.


Decided to try my hand at making my moth character's crystalline sword and a reploid-version's saber. I get told the regular sword looks better, but I'm a bit iffy on the plasma sword version.


A little bit of a concept idea, mostly mixing the X series saber with the Zero series Triple Rod and Chain Rod.

[John Red Beard]

Cool weapon designs.

[Vosur Aekira]

Thank you, but I've kinda slowed down in my sprite-works.

[Vosur Aekira]

Still in 'burnout' phase, but not trying to give up in working on sprites.


Yes, it's a tiny work drone (based on the GHOSTs from Destiny) with 'floating' arms. Each arm has its own power-supply along with feedback transmitters and ocular sensors to allow it to work remotely while the main body is focused with something else. Each arm also contains a welder/cutter/soldering unit for repairs.

[Vosur Aekira]

Well, made something that definitely challenged me in terms of patience:

(Removed, tweak in later post)
If you were to take note of the sheer size of this, it's actually bigger than most of the firearms I've done in overall size. Not only that, but I've also had to make some more ammo-types as well.

[John Red Beard]

To quote Keanu: "Guns. Lots of guns."

Good job on these. I like the different ammo types.

[Alessia Starfurr]

14.5mm APFSDS ?

[Vosur Aekira]

@Alessia: Not exactly... https://www.fourmilab.ch/documents/gau-8/figures/30mm_GAU-8_Avenger_round.png would be a closer-guess to size. As I said before, these're big... much bigger than an anti-tank chain-gun I've made previously.

@John: I think the hardest one to try to make would've been the mini Phoenix Missile.

[Alessia Starfurr]

oh like a handheld A-10 cannon then?

[Vosur Aekira]

Pretty much. Though to be honest, the characters who use these are over double the size of standard characters in the comic (though they're still not the largest race).

[Vosur Aekira]

More weapons for the large characters.

[Vosur Aekira]

September was mostly a 'dry' month in terms of ideas, only managed to get to do one during then. I do have some ideas in the works now, but this one was the only completed idea.


This one's for a friend of mine: A paint-brush rose that creates a sword-blade. The person mentioned that the character loves blue-roses, loves to paint, and seemed to be skilled in fencing. So this idea took a bit of working. The hardest part of this idea was coming up with a good angle for the open-rose (hence why there is two versions). I may need to practice on designing flowers after this next project is done.

[Vosur Aekira]

I've not entirely been dead this past month or two... trying to do some here and there while my body tries to recover from this season of shenanigans from work. But that aside, this idea was one that I kinda tried to get after seeing a picture of the Iron Knuckle boss from The Legend of Zelda 2: The Adventure of Link. Essentially, a mount or ride for the law in a section of the comic my friend makes.