-=> Euharmonics' Fursuit Thread <=-

[Calun the Bat]

Nice! I LOVE the webbing. I'd personally have lengthened the middle and index fingers on the wings, even if it's tough. Just out of personal preference to bat wings having an appropriate spread. And the head is cute. Reminds me a LOT LOT of Dutch Angel Dragons. Like... a crazy lot.

[guest22811]

Thanks for the feedback! I can see where you're coming from and I definitely agree.

[guest22811]

I have two fursuits that I completed quite a while ago
Being me, I never bothered to make a post or even mentioned them. Since I've already finished them both, I felt like I would ask for critique : 3


Here is some photos of the first suit that I made back in January. His name is 'Tragedy', or 'Vincent', informally. It's got a slight stilt on the hooves, 3D eyes, and a moving jaw.. I need to fix the tail, I do realise that goats do not have tails like that. This suit has a moving jaw that you can see here:
https://www.youtube.com/watch?v=TyzyMpeIDi8&t=24s

Spoiler for Hidden:

I wear it as a partial sometimes.


I don't have as many pictures of this fursuit compared to the other one.

I am more proud of my second fursuit. This one is skintight, similar to the Sofia / Belo4ka fursuit. She's unofficially named 'Vivacity', and I have no ideas for names. I guess I'll just wait till I find something I like lmao.
Here are some majestic pictures:

Spoiler for Hidden:

Why did I take this LMAO ^^


*Pushes plant*

Thanks for reading this post! Any critique is appreciated.







*trips over*

[Vortex Cynbel]

I am not very experienced with fursuits but i have to admit what you've done there look really good


I have to say that you are very very talented and that you should continue doing what you already do ^^
As for the individual suits I can't decide which one I like the most! Both of them look really great and the moving jaw part really made impressed me ^__^


You are so lucky you can make fursuits x3 I wish I could make mine..
Anyways keep up the great work 

[guest22811]

I am not very experienced with fursuits but i have to admit what you've done there look really good


I have to say that you are very very talented and that you should continue doing what you already do ^^
As for the individual suits I can't decide which one I like the most! Both of them look really great and the moving jaw part really made impressed me ^__^


You are so lucky you can make fursuits x3 I wish I could make mine..
Anyways keep up the great work 

Ahhmmmffggg
THanks so much

I love them both as well!

You can always commission for a suit or learn to make one yourself

[Ventus Fall]

I am really impressed with your suits. You have a nice style going on. Arguably probably my (or one of my) most favourite toony-styles

While owning two fursuits myself, I don't think I have anything to critique on. I wouldn't know what!
I like how you mention they're skin-tight as well. That's something I'm looking for if I would ever get another fursuit.

Anyways, nice job once again

[guest22811]

I am really impressed with your suits. You have a nice style going on. Arguab.....

Aaaah Thank you Ventus


 

[guest22811]

All the info below is outdated haha.
The suit has been repurposed for a client instead, meaning this is the 7th suit I have made.


================

Just started today, nothing interesting to see at the moment, except for a bucket-head base. I will try and post updates.



The specs I am planning to implement are:
- Skintight suit, made out of plush/mink fur. Similar to Belo4ka.
- Static jaw with follow-me eyes.
- Extremely long set of ears.
- Attached tails (I really despise non attached ones).
- Fullsuit.


However, I do have a question to dump.
Where the *hell* would I put a zipper? I'm aiming for a skintight suit, and adding a zip in the front or back would be obviously visible. I can't 'hide the zip with the fur' because I'm not using fur, I'm using mink, and it's very very lowpile.
I can literally 'cut' (seperate) the entire suit in half along the waist, I will be wearing clothes over it. If anyone has a better suggestion, gimme xD

[Ventus Fall]

If you're wearing clothes over it, you could put the zipper at the pack.
Let the head-neck flap cover it a bit at the top-most part, wear clothes and it should be as good as invisible, no?
You can always use a scarf or something of the sorts to also cover the neck part up if you don't want to have that.

My ITO suit is all faux seal fur, so really short fur as well. The zipper is at the back. Not only is the zipper the same colour as the fur, it's also rather tiny. So even by itself it is really rather unnoticeable.
But even then it is sovered by ITO's 'mane', a green longer-haired fur flap covering the back.

This is the best picture I can find showing the back of ITO with the green mane on the back covering it all up: http://www.furaffinity.net/view/14628836/
The mane consists of the head part and the torso/back/shoulder part.

[Malina]

I agree with ventus on the zipper bit, I'd probably use a scarf personally
I can't wait to see photos of it, your suits and art are always nice to see ^^

[guest22811]

AH, the neck flap thing is what I did for my previous attempt at a skintight suit, but it made the neck look out of proportion :0 The sona I am currently trying to reproduce in fursuit form has a very visible neck, and a generally human figure.


A scarf could be a good alternative ^^ Definitely never thought of that! Thanks for your contribution


And ey, Lumix, thanks! 

[Nori]

Making a hidden zipper won't work? I've sewn hidden zippers for bags and whatnot, and it works pretty well
https://www.craftsy.com/blog/2014/02/how-to-sew-an-invisible-zipper/

[Ventus Fall]

Would a hidden zipper work? I'm honestly asking as for my ITO suit it is a semi-hidden zipper and it doesn't work too well.
1) For some reason even the short fur seems to go in between the zipper.
2) The zipper handle is very tiny and people find it extremely hard to pull down. Might be because things seem to 'pull'. If that even makes sense. Not just the fur, just the overall stuff. (Words )

I mean, you can always try, there is no harm in trying x3

[guest22811]

ohmuuhgahd that would probably work, gonna give it a try :0000000000


ThankS A TON 

Post Merge: June 05, 2017, 11:10:21 AM
Got this base hacked out today!



[/size]
What does everyone think? The character is a rabbit xD
Unfortunately I don't have a proper reference sheet, this is all I have got xD

Forgive me for the not-very-anatomically-correct drawing, this was done a while ago in my new furry times.
I still need to make the muzzle a bit angled, just realised that.

[guest22811]

I FOUND THESE IN THE DUSTY CORNER OF MY FURSUIT PICTURES FOLDER AND THOUGHT I WOULD BRING THEM OUT AGAIN


LOOK AT THESE
gLORIOUS
BAT s


But yeah. I took them a while ago, showed some people, then forgot about them.
Here.